23 changing the sound and display settings, Boosting the bass sound – Sony CDX-MP450X User Manual

Page 23

Advertising
background image

23

Changing the sound and
display settings

The following items can be set:

SET (setting)

•CLOCK (page 9)
•BEEP — to turn the beeps on or off.
•RM (Rotary Commander) — to change the

operative direction of the controls of the
rotary commander.
— Select “NORM” to use the rotary

commander as the factory-set position.

— Select “REV” when you mount the rotary

commander on the right side of the
steering column.

DIS (display)

•D.INFO (Dual Information) — to display the

clock and the play mode at the same time
(ON).

•M.DSPL (Motion Display) — to turn the

motion display on or off.

•A.SCRL (Auto scroll) (page 11).

Note
If you connect an optional power amplifier and do
not use the built-in amplifier, the beep sound will
be disabled.

1

Press (MENU).

2

Press either side of (FLDR/PRESET)
repeatedly until the desired item
appears.
Each time you press the (–) side of
(FLDR/PRESET), the item changes as
follows:

CLOCK t BEEP t RM t D.INFO t M.DSPL

t A.SCRL

Note
The displayed item will differ depending on
the source.

Tip
You can easily switch among categories (“SET,”
“DIS,” “EDT” (edit mode), and “P/M” (play
mode)) by pressing either side of
(FLDR/PRESET) for two seconds.

3

Press the (+) side of (SEEK) to select the
desired setting (Example: “ON” or
“OFF”).

4

Press (ENTER).
After the mode setting is completed, the
display returns to normal play mode.

Boosting the bass sound

— D-bass

You can enjoy a clear and powerful bass
sound.
The D-bass function boosts the low and high
frequency signal with a sharper curve than
conventional bass boost.
You can hear the bass line more clearly even
while the vocal volume remains the same. You
can emphasize and adjust the bass sound
easily with the D-BASS button.

Adjusting the bass curve

Press (D) (D-BASS) repeatedly until the
desired bass level (1, 2, or 3) appears in
the display.

To cancel, select “D.BASS-OFF.”

Note
If the bass sound becomes distorted, select a less
effective setting of “D.BASS” or adjust the volume.

0dB

D.BASS-3

D.BASS-2

D.BASS-1

D.BASS-3

D.BASS-2

D.BASS-1

Level

Frequency (Hz)

Advertising
This manual is related to the following products: