Sunbeam 7689 - Manual (Page 7)

Do not apply wrist unit
on top of a shirt sleeve.
Wrap the cuff snugly
around your wrist and
attach using the fas-
tener. The top and bot-
tom edges of the cuff
should be tightened
evenly around your
wrist. (diagram C)
Any gap between the
wrist and cuff will
affect the result of
measurement.
The fabric cuff can be
folded down for ease
of viewing the display.
(diagram
Diagram C
Diagram D
Taking a Measurement
Please review the previous sections on proper
placement of the cuff and proper arm position.
1) After the cuff has been properly placed on
either the right or left wrist, press the ON/OFF
button. All display symbols will appear
momentarily. Note: The low battery symbol
will also appear at this time. This does not
indicate a low battery unless the low battery
symbol remains on continuously.
2) After the display reads press the START
button.
3) The cuff will automatically inflate to an appropri-
ate pressure, and will then begin to slowly deflate
as it takes the measurement The cuff will be quite