Sunbeam 7689 - Manual (Page 9)

Memory Function
Memory Input
Your Sunbeam Wrist Blood Pressure Monitor has
a memory feature. When a valid measurement is
made, the reading data (systolic, diastolic and
pulse rate) will be stored in the memory auto-
matically as soon as the unit is turned off,
automatically shuts off, or when another
measurement is initiated. The monitor has the
capacity to store 14 readings, and also computes
an average of all memory readings. When more
than 14 readings are taken and recorded to
memory, the oldest ones will be lost.
Memory Recall
To recall your last reading, press the MEMORY
button. A “1” will appear in the lower right hand
corner of the display which represents the
newest memory reading. When the memory but-
ton is pressed again, the display will show
which represents the second newest reading,
and so on. The memory will recall up to 14 pre-
vious readings. When the letter “A” appears in
the display, the average value of your systolic,
diastolic and pulse rate based on the memory
readings is shown.
Memory Erase
When the batteries are taken out of the monitor,
all records of readings saved in memory will be
erased. NOTE: When taking a measurement,
the MEMORY button is inactive.