Sakar Digital Concepts 57483 - Manual (Page 11)

11
Starting Your Camera
Press and hold the On/Off button for 2 seconds to start the camera. The LCD screen will light up and the camera will sound a “beep”. This will
confirm that your camera is on and ready for use.
Camera Mode
Set the mode dial to Camera Mode – the icon will appear on your LCD screen.
Taking Photos
You can compose your shot using either LCD screen or the view finder. Hold the camera steady and press the shutter button to take photo. There will
be a short delay while the camera saves the photo to memory.
After each photo is shot (when the camera returns to icon mode) the numbers of photos left to shoot at this resolution is displayed at the top left of the
LCD screen.
When the camera's memory (photo capacity) is full, the LCD screen will display “0”. If you attempt to take a photo when the memory is full the camera
will beep continuously. Please insert a SD memory card to transfer and take more photos.
Digital Zoom
You can magnify your subject up to 4 times using the digital zoom. Use the and buttons to adjust the zoom. The icon will flash on your
LCD screen. Push the button to zoom in on your subject. Push the button to zoom back out.
Display
The default display setting shows icons on the LCD screen. Press the display button once to switch off the icons. Press the button again to
switch off the LCD (to conserve battery power).
Pressing the display button repeatedly toggles between these display modes.