Sakar Digital Concepts 57483 User Manual
Page 12
12
Flash
In low light conditions it is best to use the built-in flash. You can also use the flash to compensate for backlight
conditions.
To set the flash:
Press the
button. The
will appear on the LCD screen. This means the flash function has been
"forced on" (manual flash). If the flash is not ready a red LED will light up above the LCD screen and the
icon
will flash repeatedly- wait until the flash is ready before taking a photo. A low battery warning will appear on the
LCD screen if there is insufficient battery power to operate the flash.
Press the
button repeatedly. Select the icon
shown on the LCD screen. This will activate the
automatic flash.
Press the
button repeatedly until the
icon appears. This will turn off the flash function.
Self-Timer
You can include yourself in a photo by using this feature to delay the time between your pressing the shutter and
when the photo is actually taken. It is recommended that you use a tripod when you use the self timer.
Press the
button to select the
ON
icon shown on the LCD screen.
Press the shutter button to start a 10 second count down (the count down will appear on the LCD). After 10
seconds a photo is taken.
Date
If date is selected the date and time the photo was taken will be recorded on the photo.
To set the date and time please refer to the Date and Time section in Setup Mode.
Pressing the
button toggles date on and off – the date icon
will appear on the LCD screen if date is on.