Sakar Digital Concepts 57483 - Manual (Page 38)

38
If the camera is installed correctly, there will be a category listed for "Imaging Devices" and clicking on the "+" next
to it should reveal your camera. If not, you will likely see "Digital Still Camera" under "Other Devices" with a brightly
colored marking next to it indicating it is not functioning correctly.
If you are running Windows ME: Right click on the non functioning device and select Remove.
If you are running Windows 2000 or XP: Right click on the non functioning device and select uninstall. If a warning
pops up, press OK.
6. Restart your computer again. Your camera is now successfully installed.
Q: How do I make sure I don't lose important pictures?
Your camera uses flash memory which requires a constant electric current to store your photos. Should your
camera lose power (for instance if the battery dies or is removed) all stored pictures will be lost. We recommend
always downloading your photos to your computer as soon as possible to prevent unintentional data loss. Photos
and videos stored on an SD memory card will not be lost regardless of any change in battery power.
Q: How do I restart my camera if the camera freezes up?
Open the battery door and remove the batteries for a few minutes then re-install the batteries with the correct
polarity facing up. Press the power button to start your camera.