Sony IPELA SNC-RZ25P - Manual (Page 64)

A
d
mini
s
tra
ting
t
he
Came
ra
Saving the Camera Position and Action — Preset position setting Menu
64
Tour Tab — Setting a Tour
Up to 16 positions can be programmed, and the camera
moves to the programmed positions sequentially (Tour).
Up to 5 groups can be set as the Tour.
Tour name
Select a tour name from among A, B, C, D and E.
Stay time
Type a period of time for which the camera is to stay at
each preset position, between 1 and 3600 seconds.
Speed
Select the Pan speed from the list box. The camera pans
faster with a higher number setting.
Sequence
Select and set preset number 1 to 16 for each of 16 list
boxes.
The camera moves to the preset position saved in the
selected preset number sequentially. The sequence of
camera movement starts from the preset position
specified in the list boxes from left to the right, then from
top to bottom. After bottom right, the camera returns to
top left. This sequence is cyclical.
If you select End in the list box, the program ends before
this and the camera returns to the first preset position.
This sequence is cyclical.
Tour table
You can check the contents of Tour settings on the
another window.
Tour selection
You can activate the tour according to the schedule.
Selected tour name
Select the tour name A to E you want to activate. Select
None if you do not want to activate any tour or if you
want to stop the tour in action.
Effective period
Select the period for which the tour activates.
Always: The tour can be activated any time.
Use scheduler: The tour is activated according to the
schedule you have set.
Resume time on inactivity
You can operate PanTilt or Zoom during the tour, or
select the tour activity after the preset activity by the
alarm.
On: Specify the wait time before the tour restarts,
between 5 and 600 seconds. The tour restarts
automatically after the specified time has elapsed.
Off: The tour does not restart. None is displayed on
Selected tour name.