Warning – Scag Power Equipment WILDCAT STWC48V-25CV User Manual
Page 2
WARNING
FAILURE TO FOLLOW SAFE OPERATING PRACTICES MAY RESULT
IN SERIOUS INJURY OR DEATH.
Read this manual completely as well as other manuals that came with your mower.
•
DO NOT operate on steep slopes. To check a slope, attempt to back up it (with the
•
cutter deck down). If the machine can back up the slope without the wheels slipping,
reduce speed and use extreme caution.
Under no circumstances should the machine be operated on slopes greater than 15
•
degrees. ALWAYS FOLLOW OSHA APPROVED OPERATION.
DO NOT mow on wet grass. Wet grass reduces traction and steering control.
•
Keep all shields in place, especially the grass discharge chute.
•
Before performing any maintenance or service, stop the machine and remove the
•
spark plug wire and ignition key.
If a mechanism becomes clogged, stop the engine before cleaning.
•
Keep hands, feet and clothing away from power-driven parts.
•
Keep others off the mower (only one person at a time)
•
REMEMBER - YOUR MOWER IS ONLY AS SAFE AS THE OPERATOR!
HAzARD CONTROL AND ACCIDENT PREvENTION ARE DEPENDENT UPON THE AWARENESS,
CONCERN, PRUDENCE, AND PROPER TRAINING OF THE PERSONNEL INvOLvED IN THE
OPERATION, TRANSPORT, MAINTENANCE, AND STORAGE OF THE EqUIPMENT.
This manual covers the operating instructions and illustrated parts list for:
STWC48v-25Cv
with a serial number of
E4300001 to E4399999
STWC48v-26KA-LC
with a serial number of
E4400001 to E4499999
STWC52v-25KA
with a serial number of
D6900001 to D6999999
STWC52v-26KA-LC
with a serial number of
D7000001 to D7099999
STWC61v-26KA-LC
with a serial number of
D7100001 to D7199999
STWC61v-27Cv
with a serial number of
D7200001 to D7299999
SMTC-48v
with a serial number of
D9100001 to D9199999
SMWC-52v
with a serial number of
D9200001 to D9299999
SMWC-61v
with a serial number of
D9300001 to D9399999
Always use the entire serial number listed on the serial number tag when referring to this product.