Display contrast -10, Total count -10, Job count -10 – Sony MX-C400P User Manual
Page 178: Device count -10, Display contrast, Total count, Job count, Device count
3-10
OPERATION PANEL (GENERAL)
Display Contrast
Use this to set the contrast of the machine's display. Select the [Display Contrast] key.
In the screen that appears, select the [Lighter] key or the [Darker] key to adjust the contrast.
Total Count
This function shows the page count in each mode. Select the [Total Count] key.
Job Count
This displays or prints out the counts of all jobs.
Device Count
This is used to display or print the counts of the peripheral devices installed on the machine.
• Each sheet of paper used for automatic two-sided printing is counted as two pages.
• Pages printed directly from the machine such as list prints are included in the "Other Prints" count.
• The items displayed (or printed) will vary depending on the machine specifications and peripheral devices installed.
The items displayed (or printed) will vary depending on the machine specifications and peripheral devices installed.