Sony MX-C400P - Manual (Page 51)

1-48
BEFORE USING THE MACHINE
EXTERNAL ACCOUNT APPLICATION
An external account application can be used in "external authentication mode" or "external count mode". When external
authentication mode is used, the login screen is retrieved from the application when the machine is started. When a job
ends, a job notification screen is sent to the application to enable counts to be kept for each authenticated user.
When "external count mode" is used, the login screen is not displayed when the machine is started. Only a job result
notification is sent to the application. User authentication by the external account application cannot be used, however,
the external account application can be used in combination with the internal account function.
External account application setup
To enable an external account application in the Web pages of the machine, click [Application Settings] in the
administrator menu frame, and then [External Applications Settings] and [External Accounting Application Settings].
Configure settings for the external account application in the screen that appears. The setting change will take effect
after the machine is restarted. To restart the machine, see "
TURNING THE POWER ON AND OFF " (page 1-13).
Operation in external account mode
The two modes for using an external account application operate as explained below.
External authentication mode
When the "Enable Authentication by External Server" checkbox is selected in "External Application Setting" in the Web
page, the machine enters external authentication mode. When the machine is powered on in external authentication
mode, the machine accesses the external account application and displays the login screen. The login screen also
appears when the [Call] key is selected to run a job in the job status complete screen. (The login screen does not appear
if the user has already logged in by the normal method.)
The [JOB STATUS] key can be pressed while the login screen appears to show the job status screen. To return to the
previous state, press the mode select key.
If login fails
If the login screen fails to appear or the application does not operate correctly, the machine may also stop operating
correctly. In this event, it is recommended that you quit external account mode from the Web pages of the machine. For
more information, see [Help] in the Web pages.
To forcibly exit external account mode from the machine's operation panel, follow these steps:
Change "External Application Setting" in the Web page. Restart the machine to make the change take effect. To restart
the machine, see "
TURNING THE POWER ON AND OFF " (page 1-13).
External count mode
When only the "External Account Control" setting is enabled in "External Application Setting" in the Web page, the
machine enters external count mode.
Unlike external authentication mode, when the machine is started in "external count mode", the login screen of the
external account application is not displayed. Only the job result is sent to the external account application. External
count mode can be used together with the user control function of the machine. (External count mode can also be used
when the user control function is disabled.)
• The user control function of the machine cannot be used in external authentication mode.
However, "User Registration", "User Count Display", "User Count Reset", "User Information Print", and "The Number of
User Name Displayed Setting" can be used.
• The mode select key cannot be used while the login screen appears.