Sony MX-C400P - Manual (Page 55)

1-52
BEFORE USING THE MACHINE
REPLACING THE TONER COLLECTION
CONTAINER
The toner collection container collects excess toner that is produced during printing.
When it is time to replace a supply item, a message instructing you to replace the item will appear in the display. Follow
the procedure below to replace the toner collection container.
• Do not subject the toner collection container to shock. The amount of collected toner may be incorrectly detected and
cause machine failure.
• Do not replace a supply item before the replacement message appears in the display.
• Toner may spill when the toner collection container is replaced. Before replacing the toner collection container, take
measures such as placing covers on and around the machine to prevent soiling.
1
Open the front cover.
2
Release the used toner collection
container.
(1) Turn the toner collection container lock
lever to the right until it is horizontal.
(2) Tip the toner collection container forward.
Grasp the toner collection container with both hands at
the marks on the upper right and lower left of the
container and slowly tip the container toward you.
Mark
Mark