SRS Labs WL66 - Manual (Page 18)

English
18
Base colour adjustment
Hue Saturation Brightness
Red +2 +6 +4
Green 0 0 0
Blue 0 0 0
Yellow 0 0 0
Magenta 0 0 0
Cyan 0 0 0
Reset OK
MENU Back EXIT Watch TV
Picture controls
continued
In the Picture settings menu press down until
Colour Temperature is highlighted.
Press left or right to select between Normal,
Warm and Cool to suit your preference.
1
2
Colour Temperature increases the ‘warmth’ or ‘coolness’
of a picture by increasing the red or blue tint.
Colour temperature
Picture settings
Black stretch On
MPEG NR Off
DNR Auto.
Colour Temperature Normal
MENU Back EXIT Watch TV
2/2
Press up and down to select an option, then
right to adjust the settings. 2
In the PICTURE menu press down to select
Base colour adjustment, then press OK. 1
The Base colour adjustment feature allows the
adjustment of individual colours to suit personal
preference. This can be useful when using an
external source.
Base colour adjustment
PICTURE
Picture settings OK
3D Colour management On
Base colour adjustment OK
Cinema mode Off
MENU Back EXIT Watch TV
PICTURE
Picture settings OK
3D Colour management On
Base colour adjustment OK
Cinema mode Off
MENU Back EXIT Watch TV
When 3D Colour management is selected it allows the
‘Base colour adjustment’ feature to become available.
3D Colour management
In the PICTURE menu press down to select
3D Colour management.
Press left or right to select On or Off.
1
2
To return to the original factory settings select
Reset and press OK.
g