SRS Labs WL66 - Manual (Page 21)

English
21
PC settings – picture position, clock phase,
sampling clock, reset
3
3 Use left or right to adjust until the picture clears.
In the SET UP menu press down until PC Setting
is highlighted.
Press OK to select, then down to highlight Clock
phase.
Use left or right to adjust until the picture clears.
1
2
The Clock phase matches the PC signal with the LCD
display. Adjusting this can clear horizontal stripes and
picture blur.
Clock phase
In the SET UP menu press down until PC Setting
is highlighted.
Press OK to select, then down to highlight
Sampling clock.
1
2
Adjusting the Sampling clock alters the number of pulses
per scan, this will clear vertical lines on the screen.
Sampling clock Picture position
The picture position may be adjusted to suit personal
preference.
Press B to select PC, then select PC Setting
from the SET UP menu.
1
Press OK. Press up and down to select an option,
then left or right to adjust the settings. 2
3 Press OK.
In the SET UP menu press down until PC Setting
is highlighted.
Press OK to select, then down to highlight Reset.
1
2
To return to the original factory settings.
Reset
SET UP
Language English
Country UK
AV connection OK
PC Setting OK
MENU Back EXIT Watch TV
1/2 PC Settings
Horizontal position 0
Horizontal width – 5
Vertical position 0
Vertical height – 5
Clock phase 0
Sampling clock 0
MENU Back EXIT Watch TV
1/2 PC Settings
Horizontal position 0
Horizontal width – 5
Vertical position 0
Vertical height – 5
Clock phase 0
Sampling clock 0
MENU Back EXIT Watch TV
2/2 PC Settings
Reset OK
MENU Back EXIT Watch TV
g