SRS Labs WL66 - Manual (Page 5)

English
5
Simple at-a-glance reference of your remote control.
Text control buttons
To display on-screen information
Stereo/bilingual transmissions
To exit Menus
No function on this model
To mute the sound
To select input from external sources
To select mode
No function on this model
On-screen Menus
Widescreen viewing
Selectable picture preferences
Number buttons
To return to the previous programme
For On/Standby mode
When using a TOSHIBA VCR or DVD:
press m /ll r to PAUSE/STEP
press r to PLAY
press q to REWIND
press s to FAST FORWARD
press w to EJECT
press p to STOP
press l q to SKIP-REWIND
press s l to SKIP-FORWARD
When in TV mode:
8 / 9 Time display
6 / / 7 To call up text
When in Text mode:
r To reveal concealed text
q To hold a wanted page
s To enlarge text display size
8 / 9 To select a page whilst viewing a
normal picture
The remote control
UP
Remove the back cover to reveal the battery compartment and make sure the batteries are inserted
the right way round. Suitable battery types for this remote are AAA, IEC R03 1.5V.
Do not combine a used, old battery with a new one or mix battery types. Remove dead batteries
immediately to prevent acid from leaking into the battery compartment. Dispose of them in a
designated disposal area.
The performance of the remote control will deteriorate beyond a distance of five metres or outside an
angle of 30 degrees from the centre of the television. If the operating range becomes reduced the
batteries may need replacing.
Inserting batteries and effective range of the remote
Navigation Ring:
Use P f and P e to change programme
positions and text pages
Use j – and j + to alter the volume
When using menus press up, down, left
and right to move the cursor on the
screen. OK to confirm your selection
g