Uninstalling the aircard software – Sierra Wireless AirCard 555 User Manual

Page 174

Advertising
background image

AirCard 555 Network Card User Guide

172

2130142

Uninstalling the AirCard
Software

To uninstall the AirCard software from the host PC:

1.

If your Handheld/Pocket PC is connected to the host,
disconnect it.

Watcher displays this

message in the LCD

area of the Watcher

window,

Initialization

Failed. Please

check the modem

and restart

Watcher.

a.

The AirCard is not completely
inserted into the PC card slot.

b.

The wrong driver is installed
for the AirCard.

a.

Eject and reinsert the AirCard.

b.

Uninstall the AirCard software and
reinstall it. See the section,
“Uninstalling the AirCard Software” for
instructions on removing the software.
Follow the instructions in Chapter 10
to reinstall the software.

Watcher displays the

message, “Not in

service”, in the LCD

area of the Watcher

window and the

antenna icon is

crossed out.

Inadequate signal strength may

occur for any of these reasons:

a.

You are outside the network
coverage area.

b.

Your antenna is not attached
or is pointed in the wrong
direction.

c.

You may be inside a building
or near a structure that is
causing radio interference.

a.

Ensure your antenna is properly
attached.

b.

Verify that you are within the coverage
area of your service provider.
Coverage maps are available from the
Sierra Wireless web site,
www.sierrawireless.com.

c.

Try changing your location or re-
orienting your antenna.

When attempting a

dial-up data

connection, Watcher

displays the

message, “There is

no answer” in the

LCD area of the

Watcher window.

a.

You have an account
problem or the network is
overloaded with calls.

b.

The phone number is incor-
rectly set up in the Dial-Up
Manager.

a.

Determine whether the problem is
due to an AirCard / Dial-Up Manager
setup issue or an account / network
issue by making a call to a local
number. If you are able to complete
this call, the problem is likely in the
way that the connection is set up.
Otherwise, contact your service
provider.

b.

Verify that the number you want to dial
is set up properly in the Dial-Up
Manager. See page 144 for instruc-
tions on using the Dial-Up Manager.
Verify that the phone number is
entered correctly, and that the Use 1
and Use Area Code check boxes are
appropriately set. If the area code is
required, ensure it is entered correctly.

Table 15-1: Problem Causes and Suggestions

Problem

Possible Causes

Suggestions

Advertising