Sierra Wireless AirCard 555 - Manual (Page 26)

AirCard 555 Network Card User Guide
26 2130142
· Using the default settings for the Destination Location
and Program Folder is recommended unless you have
special requirements and an advanced understanding of
PC configuration. (The Destination Location dictates
where the software is installed. The Program Folder
dictates the name assigned to the software in the Add/
Remove Programs in the Control Panel.)
· A check box allows you to choose to display release
notes. The release notes list known issues in the software
and are displayed in the Windows Notepad. (If you
choose to display them, when you are finished reading,
use the close box in the upper right corner of the
window to close the Notepad.)
· A check box allows you to choose to have a desktop
shortcut for Watcher. This gives you the option of
launching Watcher by double clicking an icon on your
desktop (as well as from the Start menu).
· Click Finish to close the last screen of the wizard.
Note: Do not forcefully connect
the antenna, or forcefully insert
the AirCard. This may damage
connector pins. See page 34 for
instructions on removing the
AirCard. 5. If your operating system is Windows 2000, you are
prompted that the driver files will be copied to your
notebook. Click
OK . Click Yes on the Digital Signature Not
Found window each time it appears.
6. Click OK when you are prompted to insert the AirCard.
Attach the antenna and insert the AirCard into your PC
card slot.
7. Click OK when you are notified that the installation is
complete. If your operating system is Windows 95,
Windows 98, or Windows Me, restart your PC from the
Start menu.
On completion of this step, Watcher, the Network Adapter
Manager, and the AirCard driver are installed and you can
proceed to install the Venturi compression software. This is
described in the “Venturi Software Installation” section on
page 33.