Sony VMC-IL4415 - Manual (Page 11)

Introducing the Digital TV (DTV)
5
qh MTS/SAP Press repeatedly to step through the Multi-channel TV
Sound (MTS) options:
Stereo, Auto SAP , and Mono. Also
available in the Audio menu. For details, see page 49.
qj POWER buttons
(GREEN) Press to turn on and off the DTV and other audio/video
equipment you have programmed into the remote
control. For instructions, see “Programming the Remote
Control” on page 62.
qk FUNCTION
buttons Press to select the equipment (SAT/CABLE or TV) that
you want to operate. The indicator lights up momentarily
when pushed to show which device the remote control is
operating.
ql TV/VIDEO Press repeatedly to step through the video equipment
connected to your DTV’s video inputs.
w; 0 – 9 and ENTER Press 0 - 9 to select a channel — the channel changes after
2 seconds. Press ENTER to select immediately.
wa GUIDE Press to display the program guide. For details, see
page 32.
ws CH Press to scan through channels. To scan rapidly through
channels, press and hold down either
CH button.
wd EXIT Press to exit the on-screen menu or display and return to
normal viewing.
wf SURF FAVORITE Press to display the Favorite Channels list. For details, see
page 35.
wg JUMP Press to jump back and forth between two channels. The
DTV alternates between the current channel and the last
channel that was selected.
wh Press to turn on and off Twin View. For details, see pages
38 to 40.
wj DRC
CINEMOTION Press repeatedly to step through the available high-
resolution picture modes:
Interlaced, Progressive and
CineMotion . Also available in the Video menu. For details,
see page 47.
wk TIMER Press to program the DTV to turn on and off and tune to a
specific channel at two scheduled viewing times (see
page 43). Also available in the Setup menu (see page 60).
Button Description