Sony VMC-IL4415 - Manual (Page 50)

Using the DTV Features
44
5 Move the joystick V and v to set the day(s), time (hour, minute,
AM/PM), duration, and channel number. Press or b to
confirm each setting and move to the next setting. Press B to go
back to the previous setting.
6 After you’ve set the channel number, press to save the Timer
settings. The settings are displayed in the Timer screen and the
Timer is set to
On .
The DTV is now set to turn on, tune to the channel you’ve set, and
then turn off at the times you set for that Timer. The Timer indicator
on the front panel indicates the Timer is set.
To turn a Timer setting on or off
❑ Select On or Off in step 3 (page 43).
To change a Timer setting
❑ Set the timer ( Timer 1 or Timer 2 ) again. The old timer setting is
overwritten.
To set a second Timer setting
❑ Set the other unset timer ( Timer 1 or Timer 2 ).
Setting the Clock If you didn’t set the clock during the DTV’s initial setup (see page 30),
you need to set it before you can set either of the Timers.
1 Press TIMER .
The Timer Setup screen appears (as shown on pag e43).
2 Move the joystick V or v to highlight Set the Clock , then press .
3 Move the joystick V and v to set the current day and time (hour,
minute, and AM/PM). Press or move the joystick b to confirm
each setting and move to the next setting. Move the joystick B to
go back to the previous setting.
4 When you finish setting the day and time, press to save the
clock settings.
You can also access the
Timer through the Setup menu.
For details, see page 58.
z