Sony SLV-D900G User Manual
Page 100
100
Troubleshooting
P
lay
b
a
ck
The picture has no sound.
• The tape is defective.
• If you made A/V connections, check the audio cord
connection.
The sound from a tape recorded with
the VCR is not in stereo or the
STEREO indicator in the display
window is flashing.
• Adjust the tracking.
• The video heads are dirty. Clean the video heads using
the Sony T-25CLD, E-25CLDR, or T-25CLW video head
cleaning cassette as explained above.
Reco
rd
in
g
No TV programme appears on the
TV screen.
• Make sure the TV is set to the video channel. If you are
using a monitor, set it to video input.
• Existing broadcasts may interfere with the VCR. Reset
the RF channel output of your VCR (page 15).
• Select the correct source with the INPUT SELECT
button. Select a programme position when recording TV
programmes; select a line input when recording from
other equipment.
TV reception is poor.
• Make sure the aerial cable is connected securely.
• Adjust the TV aerial.
The tape starts playing as soon as it is
inserted.
• The safety tab has been removed. To record on this tape,
cover the tab hole.
The tape is ejected when you press
z REC.
• The safety tab has been removed. To record on this tape,
cover the tab hole.
Nothing happens when you press
z REC.
• Make sure the tape is not at its end.
T
im
e
r reco
rd
in
g
The timer does not operate.
• Check that the clock is set.
• Make sure a tape has been inserted.
• Check that the safety tab has not been removed.
• Make sure the tape is not at its end.
• Make sure a programme has been set for timer recording.
• Make sure your timer settings are past the current time.
• Check that the decoder is turned on.
• Check that the satellite tuner is turned on.
• The clock stops if the DVD-VCR is disconnected from
the mains for more than one minute. Reset the clock and
timer.
• Turn the power off and unplug the mains lead.
The VIDEOPLUS menu or the
TIMER PROGRAMMING menu
does not appear.
• Check that TIMER METHOD in the USER SET menu is
set correctly (page 95).
The PDC function does not operate
properly.
• Check that the clock and the date are set correctly.
• Check that the PDC time you set is the correct one (there
might be a mistake in the TV programme guide). If the
broadcast you wanted to record did not send the good
PDC information, the VCR will not start recording.
• If the reception is poor, the PDC signal might be altered
and the VCR might not start recording.
Symptom
Remedy