Sony SLV-D900G - Manual (Page 21)

Getti
ng Sta
rted
21 Presetting channels
If the picture is not clear
If the picture is not clear, you may use the Manual Fine Tuning (MFT) function.
After step 5, press
V/v to select “MFT.” Press B/b to get a clear picture, then press
O RETURN to exit the menu.
Tip
• The DVD-VCR must receive channel information for station names to appear automatically.
Note
• When adjusting MFT, the menu may become difficult to read due to interference from the
picture being received.
Changing/disabling programme positions
9 Press O RETURN repeatedly to exit the menu.
After setting the channels, you can change
the programme positions as you like. If any
programme positions are unused or contain
unwanted channels, you can disable them.
You can also change the station names. If the
station names are not displayed, you can
enter them manually.
Changing programme
positions
Before you start…
• Turn on the DVD-VCR and your TV.
• Set your TV to the video channel so that
the signal from the player appears on the
TV screen.
• If the DVD player is in play mode, you
cannot display the “SETUP MENU.” Stop
DVD playback.
RETURN
SET UP
O RETURN
V/v/B/b
ENTER
continued