Sony SLV-D900G - Manual (Page 93)

93 Editing
VCR Ad
ditio
n
a
l Ope
ra
tion
s
Example C
How to connect to a stereo system
Connect the LINE-2 IN t/o L/R jacks on this DVD-VCR to the audio output jacks on the
stereo system, using the RK-C510HG audio cable (not supplied).
Notes
• Make sure you connect the plugs to jacks of the same colour.
• If the other VCR is a monaural type, leave the red plugs unconnected.
• If you connect this VCR to both the LINE IN and LINE OUT jacks of the other VCR, select
the input correctly to prevent a humming noise.
• If the other VCR does not have a Scart (EURO-AV) connector, use the VMC-2106HG cable
instead and connect the cable to the line out jacks of the other VCR.
• When you connect another VCR to the LINE-3 or LINE-2 connector, press INPUT SELECT
to display “LINE 3”or “LINE 2” in the display window.
Operation (when recording on this VCR)
Before you start editing
• Turn on your TV and set it to the video
channel.
• Press INPUT SELECT to display the
connected line in the display window.
• Press SP/LP to select the tape speed, SP or
LP.
• Press SELECT VIDEO to control the
VCR.
TV
LINE-3
VMC-2121HG Scart cable (not supplied)
Scart
(EURO-AV)
: Signal flow
Your VCR (Recorder)
Other VCR (Player)
z REC X
continued