Changing clipit™ covers, Changing clipit™ covers, Dismantle the phone – Siemens C70 CT70 User Manual
Page 11: Assemble the phone
©
Sieme
ns
AG
2003, O:\M
obil\R65\C7
0_He
ra
_P
oC
\en\sug\_v
on
_L
ehmann\C70_
Startup.fm
Getting started
10
VAR Langua
ge: en; V
A
R issue
date: 041104
left page (10)
of SUG_C70 Hera (PoC), en, A31008-H7803-A1-1-7619 (24.11.2004, 15:36)
Changing CLIPIt™
covers
You can use CLIPIt™ covers (accesso-
ries) to personalise the appearance
of your phone as you wish.
Before changing the keypad or
faceplate, switch the phone off.
Dismantle the phone
Take off the battery cover and
remove the battery (see p. 8).
To remove the faceplate, insert the
key into the opening provided, apply
slight pressure
1
and turn it at the
same time
2
to open the lock.
Do not use the key to lift the phone
as this could damage the faceplate.
Assemble the phone
First insert the keypad mat
3
into
the faceplate. Ensure that it is sitting
exactly in place.
*) If there are small pins at the bot-
tom of the faceplate: position the
tabs on both sides of the keypad mat
precisely on these pins. before car-
rying out step
4
.
Insert the phone into the bottom of
the upper faceplate
4
and then
push it in carefully until it clicks into
position
5
. Finally, replace battery
cover (see p. 8).
3