Siemens C70 CT70 - Manual (Page 47)

©
Sieme
ns
AG
2003, O:\M
obil\R65\C7
0_He
ra
_P
oC
\en\sug\_v
on
_L
ehmann\C70_
Set
up.f
m
Setup 46
VAR Langua
ge: en; V
A
R issue
date: 041104
left page (46) of SUG_C70 Hera (PoC), en, A31008-H7803-A1-1-7619 (24.11.2004, 15:36)
Data services
Default setting and activation of the
connection profiles for MMS, WAP
applications. The phone default set-
ting varies from service provider to
service provider. Consult your serv-
ice provider or go to this address in
the Internet for more information
www.siemens.com/
mobilephonescustomercare in the FAQ
section.
HTTP profile
The phone default setting varies
from service provider to service pro-
vider. Consult you service provider
or go to this address on the Internet
for more information
www.siemens.com/
mobilephonescustomercare in the FAQ
section.
Authentication
Activate or deactivate encrypted
WAP dial-up (CSD connections only).
Security
C
¢
T
¢
Security
¢
Select function.
Auto key lock
The keypad is locked automatically if
no key has been pressed for one
minute in standby mode. This pre-
vents the phone from being used
accidentally. However, you can still
be called and you can still make an
emergency call.
Direct call
Only one phone number can be
dialled. The required phone code
(4 to 8 digits) is set by you and
entered at the first security prompt.
#
To switch off, press and
hold , then enter the
phone code.
Additional information
Block/unblock in standby mode.
In each case:
#
Press and hold.