Siemens SIMATIC NET CP 343-1 - Manual (Page 4)

english
2 Product information CP 343–1
C79000–Z8964–C038–05
Notes for the Reader
Safety Guidelines
This manual contains notices which you should observe to ensure your
own personal safety, as well as to protect the product and connected
equipment. These notices are highlighted in the manual by a warning
triangle and are marked as follows according to the level of danger:
Note
draws your attention to particularly important information on the product, handling
the product, or to a particular part of the documentation.
!
Caution
indicates that minor personal injury or property damage can result if proper pre-
cautions are not taken.
!
Warning
indicates that death, severe personal injury or substantial property damage can
result if proper precautions are not taken.
!
Danger
indicates that death, severe personal injury or substantial property damage will
result if proper precautions are not taken.
We have checked the contents of this manual for agreement with the
hardware and software described. Since deviations cannot be
precluded entirely, we cannot guarantee full agreement. However,
the data in this manual are reviewed regularly and any necessary
corrections included in subsequent editions. Suggestions for
improvement are welcomed.
Technical data subject to change.
Disclaimer of Liability Copyright E Siemens AG 1998..1999 All rights reserved
The reproduction, transmission or use of this document or its
contents is not permitted without express written authority.
Offenders will be liable for damages. All rights, including rights
created by patent grant or registration of a utility model or design, are
reserved.
Siemens AG
A&D
Industrial Automation Systems
Postfach 4848, D-90327 Nürnberg