Sony DS-2 - Manual (Page 18)

18
3
Recording functions
Pause
Press the REC button while recording.
➥
“REC PAUSE” will flash on the display.
• The recorder will time out after 2 hours when left
in “REC PAUSE”.
Resume Recording
Press the REC button again.
➥
Recording will resume at the point of
interruption.
Notes
• To ensure recording from the beginning, start
speaking after you see the red record/play
indicator lamp on.
• A beep will sound when remaining recording time
reaches 60 seconds, 30 seconds, and 10
seconds while recording.
• “MEMORY FULL” or “FOLDER FULL” will be
displayed when the memory or folder capacity is
full. Delete any unnecessary files before
recording any further (
☞ P.31) or transfer voice
files to your computer using DSS Player
Software.
• DSS format in SP and LP mode recording, and
WMA format in stereo HQ and stereo SP and
HQ mode recording.
• While recording, pressing the PLAY button stops
recording and plays back the current file.
Recording
Using the Variable Control Voice Actuator (VCVA)