Sony DS-2 - Manual (Page 50)

50
6
Connecting to Your PC
Place the recorder on the cradle
1 Connect the USB connection
cable to the USB port or the USB
hub of the PC.
2 Connect the USB connection
cable to the cradle.
Connect the mark of the USB
connection cable facing up to match the
mark of the cradle connection port.
3 Make sure that the recorder is in
the Stop mode, and place it in the
cradle.
“STORAGE REMOTE” is displayed on
recorder if the USB cable is connected.
PC I/F
Connecting to
Y
our PC
Connecting to your PC using the cradle