Smeg SCP108SG - Manual (Page 12)

42
Instructions for the User
7.6 Secondary menu
This appliance also has a "secondary menu" allowing the user to:
1 Set the time shown on the display (DSP1).
2 (P1: OF / ON) Activate or deactivate the child safety lock ( ); this
function locks out all the functions and knobs after 2 minutes of
operation without any command from the user (when this system is
active, the
symbol appears on DPS1). To exit the lockout status
temporarily to modify a cooking program or select a different function,
keep PT1 pressed until the
symbol disappears from DSP1. The
required changes can now be made, and 2 minutes after the last
setting is made the lockout will come into operation again. To
deactivate the lockout permanently, access the secondary menu and
switch the function off as described in this section.
3 (P2: OF / ON) Activate or deactivate the Show Room function, which
disables all the heating elements so that only the control panel works.
To allow the oven to be used normally, P2:OFF must be set.
4 (P3: OF / ON) Activate or deactivate the function which limits the
maximum power absorption to 2300 W.
When the child safety lock is activated (P1:ON), if a knob is turned
“bLOC” appears on DSP1 for 2 seconds. Operating PT2 also triggers the
“bLOC” alarm until the function originally selected is restored.