Smeg SCP108SG - Manual (Page 25)

55
Instructions for the User
11.2 Removing the door
11.2.1 With type 1 mobile levers
With the door completely
open, lift the levers A of
the two hinges until they
touch the hinges B and
take hold of the two sides
of the door with both
hands close to the
hinges.
1)
Raise the door to an angle of about 45° and remove it. If the hinges have
not locked, repeat the operation, raising the levers A and keeping the door
slightly raised. To reassemble, fit the hinges B into their grooves, then
lower the door into place, ensuring that it remains fitted into the grooves C,
then lower the levers A.
11.2.2 Removing doors with pins
Open the door completely and insert the pins (supplied) into the
holes from the inside. Close the door to an angle of about 45° and
lift it off. To reassemble, fit the hinges into their grooves, then lower
the door into place and extract the pins.
11.3 Removing the gasket
To allow thorough cleaning of the
oven, the door gasket can be
removed.