Smeg SCP108SG - Manual (Page 6)

36
Instructions for the User
6. DESCRIPTION OF FRONT PANEL CONTROLS
All the appliance's control and monitoring devices are placed together on
the front panel. The table below provides the key to the symbols used.
THERMOSTAT-TIMER KNOB
PT1 This knob allows you to set the time, select the
cooking temperature and duration and program
the cooking start and end times. From now on,
for convenience it will be referred to as PT1.
For instructions on how to use it correctly, see
point “7.3 First use” and “7.5 Programmed
cooking procedures”.
DISPLAY
DSP1 With the oven off, the 4-figure LED display shows the current time; when
the oven is in operation, it shows the temperature set and the cooking
duration set.
The display also contains the function cutout light (see point “7.6
Secondary menu”), the timer pilot light , the symbols relating to the
programmed cooking operations , and the door locked symbol .
From now on, for convenience it will be referred to as DSP1.