Samsung DVW-707/707P - Manual (Page 170)

Chapter 4 Adjustments and Settings for Recording
4-92
4
2
Push the MENU ON/OFF/PAGE switch repeatedly toward PAGE
(or press the rotary encoder) until the PRESET WHT page (shown
below) appears.
3
Set the WHITE BAL switch to PRST.
Note
If the WHTE BAL switch is not set to PRST when you operate the
camcorder, the adjustment value will not be reflected in the output
signal.
4
Push the MENU CANCEL/PRST/ITEM switch repeatedly towards
ITEM (or press the rotary encoder) until the cursor reaches the item
that you want to change.
5
Turn the rotary encoder to change the setting of the selected item.
COLOR TEMP: Sets the color temperature for the preset value.
Adjust the value while looking at the real image because error
tends to be bigger for adjustment of high color temperature.
FINE: Adjusts the value more precisely when the adjustment
through COLOR TEMP is not satisfactory.
R GAIN: Only the value of R GAIN is changed.
B GAIN: Only the value of B GAIN is changed.
E35*PRESET WHT E35*PRESET WHT
pCOLOR TEMP. <P>:? 6324 COLOR TEMP. <P>:? 6324
FINE <P>: 0 FINE <P>: 0
R GAIN <P>: 69
R GAIN <P>: 69
B GAIN <P>: -69
B GAIN <P>: -69