Samsung DVW-707/707P - Manual (Page 97)

Chapter 4 Adjustments and Settings for Recording
4-19
4
When the RM-P9 Remote Control Unit is connected
You can set the shutter speed of CLS using the UP/DOWN switch of the
RM-P9.
Changing the range of choice of shutter mode and
speed settings
You can reduce the time required to select the shutter mode and speed by
narrowing the choice of settings in advance. This can be done by using
the SHUTTER page of the setup menu.
Follow the procedure below.
Note
The SHUTTER page cannot be accessed when a remote control unit is
connected to the camcorder.
Changing the range of choice of shutter mode and speed settings
1
Set the MENU ON/OFF/PAGE switch to ON.
The page that was on the screen when the last menu operation ended
appears on the viewfinder screen. (When this menu is first used, the
lowest-numbered page of the currently selected pages for
configuring the menu appears.)
(Continued)
1,2,3,5
2,3,4