Samsung DVW-707/707P User Manual
Page 200
Chapter 4 Adjustments and Settings for Recording
4-122
4
5
• To end reading data, push the MENU CANCEL/PRST/ITEM
switch to CANCEL/PRST.
• To continue the reading of data, go on to step
6
.
Notes
• The data and the card ID read from the card overwrite the data
stored in the camcorder. Before going on to step
6
, re-check the
card ID and decide whether it is necessary to read the data and
card ID from the card.
• The card stores data for both user-mode settings and engineer-
mode settings. Both sets of data are read and written together.
For more information, refer to “maintenance manual.”
• There is no setup card read-write compatibility between different
models of digital camcorder. For example, a card written by the
DVW-707 cannot be read by the DVW-790WS or DVW-707P,
and vice versa.
6
Press the rotary encoder once more.
While data is being read, the message “READING DATA!” is
displayed.
When reading is completed, the message “READ : OK” appears.
E11*SETUP CARD
E11*SETUP CARD
pREAD(
READ(
pCAM)
CAM)
WRITE(
WRITE(
pCARD)
CARD)
ID EDIT
ID EDIT
WRITE
WRITE PROTECT
PROTECT
:
OFF
OFF
WHITE DATA READ: OFF
WHITE DATA READ: OFF
ID:
ID:
READ? (Y:PRESS)
READ? (Y:PRESS)