SVAT Electronics CV1010 - Manual (Page 5)

CV1010DVR 2
SVAT ELECTRONICS
now you can see
OPTIONAL ACCESSORY
Extra camera - Turn your DVR into a two camera system. (model: CV1011C)
SYSTEM BUTT SYSTEM BUTT ONS & CONNECTIONS ONS & CONNECTIONS
1. SD Card Slot
Supports up to a 2GB SD Card.
2. Navigation Buttons
Up Button: toggles motion detect recording on
or off while in Live Mode. Moves the
cursor up when navigating menus.
Right Button: moves the cursor right when
navigating menus.
Down Button: toggles between still image capture
and movie capture while in Live
Mode. Moves the cursor down when
navigating menus.
Left Button: moves the cursor left when
navigating menus.
3. OK Button
Confirms your selection on menu screens.
4. Play
Enters playback mode and toggles between full
screen view, thumbnail view, and file view.
5. Quickshot
Takes a still image snapshot or 10 second video
clip. Allows you to delete files when in playback mode.
6. Menu Button
Enters and exits the menu screen.
7. Monitor Button
Switches between monitoring modes
(full screen; picture-in-picture).
8. Motion Detection LED
Lights up when motion detection mode is active.
9. Video Mode LED
Lights up when Video Mode is active.
10. Power LED
Lights up when DVR is active.
11. Connection to Extension Wire
Extension Wire converts to camera RCA.
12. CDS Sensor
Automatically turns on the IR LEDs when it gets dark.
13. Camera Lens
Color camera lens.
14. Infrared (IR) LEDs
Allows the camera to see in the dark.
15. Sun Shield
Helps prevent glare from bright lights.
16. Mounting Bracket
Allows you to mount camera on walls and ceilings.
17. Power Switch
Turns the DVR ON and OFF.
18. RCA Inputs
Connects your camera(s) to the DVR.
19. Video Out
Sends video to your display.
20. DC In
Connects the power supply to the DVR.