SVAT Electronics CV1010 - Manual (Page 7)

CV1010DVR 4
SVAT ELECTRONICS
now you can see
2) Do not remove the SD card while in recording mode; it may damage the memory card
and image data.
4. POWER SUPPLY
Plug in the DVR's power adapter and switch the unit on. Make sure your TV is set the
video input channel to view your DVR.
5. SETTING TIME AND DATE
The recorder has an on-screen clock that will print the date and time on recorded images
when movement is detected.
a) Press the MENU button to enter the setup page
b) Select this icon and press the OK button. Use the UP, DOWN, LEFT, and
RIGHT buttons to adjust the date and time. Note: The programmed time and date
can only keep 12 hours when the power adapter is unplugged.
6. SETTING MOTION DETECTION ON/OFF
a) Press the MENU button to enter setup page
b) Select this icon and press OK button to switch motion detection ON or OFF
Note: The UP button also functions as a direct access for setting motion detection mode
on and off. Press it in monitoring mode to activate/deactivate motion detection.
7. SETTING CAPTURE FORMAT PHOTO/AVI
a) Press the MENU button to enter setup page
b) Select this icon and press OK to switch capture format PHOTO or AVI
Note: The DOWN button also functions as a direct access for selecting the capture
format of photo or AVI. Press it in monitoring mode to toggle photo/AVI formats.