SVAT Electronics CV1010 - Manual (Page 9)

CV1010DVR 6
SVAT ELECTRONICS
now you can see
4. Monitoring Mode
Press the play button a fourth time to return to monitoring.
DELETE SINGLE PICTURE / DELETE SINGLE PICTURE / A A VI / FOLDERS VI / FOLDERS
1) Press the PLAY button to enter single-picture review page. Pressing the RIGHT or
LEFT buttons once will enter Slide Show Mode and will cycle through the pictures
automatically. Press the LEFT or RIGHT button again to stop and stay at the picture you
want to delete. Then press QUICK SHOT button, select YES and press OK button to
delete.
2) When the recorder is in single photo review page, press PLAY to enter picture review
page and PLAY again to enter the file folders review page. Press the UP or DOWN
arrows button to select the file folder you want to delete. Then press the QUICK SHOT
button, select YES and press OK to delete.
Note: It may take a while to process when deleting folders if there are many photo/AVI
files in the folders.
DELETE DELETE ALL ALL PHOT PHOT OS OS AND AND A A VI / VI /
FORMA FORMA T MEMOR T MEMOR Y Y CARD CARD
Press the PLAY button to enter single-photo review page, and press PLAY to enter photo
review page. When the recorder is in photo review page, press PLAY to enter file folders
review page. Press the MENU button, select YES and press OK to delete all photos and
AVI.
Note: When you are in setup or Pictures /AVI/file folders review page, the recorder will
return to standby or motion detection status automatically after 3 minutes if no functional
keys are pressed.
MAINTENANCE MAINTENANCE
Do not use any carboxylic cleaning agents or petrol, alcohol or similar. These attack the
surfaces of the devices. Besides, the vapors are hazardous to your health and explosive.
Do not use any sharp edged tools, screw drivers, metal brushes or similar for cleaning.
The devices are maintenance-free, so never disassemble them. The guarantee becomes
void when you disassembled the appliance. Only clean the outside of the devices with a
soft, dry cloth or a brush. Prior to cleaning, remove the devices from all voltage sources.