Samsung C4235(P) - Manual (Page 19)

1
ENG
You can make the BLC (Back Light Compensation) function active or
not. For setting the BLC zone, you can select any of [BOTTOM…],
[TOP…], [LEFT…], [RIGHT…], and [CENTER…]. The actual location
is displayed when you enter each item.
In case of [USER…], you can set the desired BLC zone by defining
the size and location. You can set the Video output level in [LEVEL].
Its selectable range is from -9 to +9.
MANU…
If you press the SETUP switch after selecting MANU in the IRIS
item, an additional screen appears in which you can set manually
opening or closing the IRIS.
❚ SHUTTER
The [SHUTTER] menu is used to set the high speed electronic
shutter and AUTO low speed shutter. The high speed electronic
shutter can be used 7 different speeds and is commonly used for
imaging fast moving objects. (NTSC: from 1/100 to 1/10K, PAL:
from 1/120 to 1/10K ). The AUTO low speed electronic shutter can
be any of 13 speeds from X2 to X256 and it slows the shutter speed
to make images clearer in dark illumination. If you select an AUTO
low speed, the shutter speed is automatically lowered depending on
the darkness level.
CAMERA.ID.. OFF
IRIS. . MANU...
SHUTTER.. OFF
AGC.. HIGH
WHITE.BAL.. ATW2
FOCUS.MODE.. AF
MOTION.DET.. OFF
DAY/NIGHT.. DAY...
PRIVACY.. OFF
SPECIAL.. ...
PRESET.. ...
EXIT.. QUIT
(MANUAL)
.
LEVEL. ....................(.00).�.�.�.�.I.�.�.�.�
RET
SCC-C4333_Eng-EURO.indd 19 2007-11-12 오전 10:18:25