Motion det – Samsung C4235(P) User Manual
Page 24
2
❚
MOTION DET
[MOTION DET] menu is used to configure the motion detection related
settings. If you press the
SETUP switch when [ON…] is selected in the
[MOTION DET] menu, the corresponding screen appears.
You cannot change the setting for type 2 because it is prefixed with the
full screen. In case of 1 and 3, you can set the motion detection area
on your own.
Those 3 types are like the following:
1. Window Type
The selected area is displayed with a box. The motion can be
detected for the area only. You can manually set the motion
detection area. You can use the
Up/Down/Left/Right SETUP
switch to set the size. To move to [POSITION], press the
SETUP
switch. After setting the position using the
Up/Down/Left/Right
SETUP switch, press the SETUP switch to move to the upper
menu. To set the size and position for [AREA], select any of 0, 1,
2, and 3.
CAMERA.ID..
OFF
IRIS..
ALC...
SHUTTER..
OFF
AGC..
HIGH
WHITE.BAL..
ATW2
FOCUS.MODE..
AF
MOTION.DET.
.
ON...
DAY/NIGHT..
DAY...
PRIVACY..
OFF
SPECIAL..
...
PRESET..
...
EXIT..
QUIT
(MOTION.DET)
TYPE
.
1
AREA.
0*
....1*....2*....3*
DISPLAY.
ON
SENSITIVITY.
L
.�.�.�.I.�.�.�.
H
RET
SCC-C4333_Eng-EURO.indd 24
2007-11-12 오전 10:18:26