Assembly instructions – Stamina Products 55-1537C User Manual
Page 8
Advertising
ASSEMBLY INSTRUCTIONS
8
STEP 5
Attach the
ANGLE ADJUSTMENT BARS(85)
onto the shafts on both sides of the
MAIN FRAME(92)
with
BOLTS(M8 x 15mm)(62)
and
WASHERS(M8)(69).
Do not tighten the bolts until STEP 6.
STEP 6
Slide one of the
SUPPORT SLEEVES(84)
onto the left
ANGLE ADJUSTMENT BARS(85).
Install
the
SUPPORT SLEEVES(84)
onto the shaft on the
LEFT FRAME(2)
with the
SUPPORT SLEEVE(84)
above the shaft as shown in the illustration, and secure with a
BOLT(M8 x 15mm)(62)
and
WASHER(M8)
(69).
Insert the
PULL PIN(86)
into one of the Adjustment Holes in
ANGLE ADJUSTMENT BAR(85).
Repeat on the other side. Tighten all the bolts.
Advertising