Samsung VP-MS11 - Manual (Page 140)

ENGLISH
140 140
Connecting to a TV Monitor
You can connect your Miniket Photo directly to a TV set. Set the appropriate video output when viewing movie on the TV
(refer to page 45). Insert the Battery Pack.
1. Connect the provided Audio/Video cable to the
[Earphones and AV jack] of the Miniket Photo.
2. Connect the other end of the cable to the TV set
by matching the colours of the terminals.
3. Turn on the TV and set the <Source> to the
external input source you connected the cable.
◆ <Source> may be represented as <Line In>, <Input>,
<A/V Input>, etc. depending on the manufacturer.
4. Turn the Mode Dial to Movie mode.
◆ Movie Record mode is displayed on the TV screen.
5. Press the [Shortcut 1] button to switch to Movie Play mode.
◆ Select a movie file to play.
6. Move the joystick left / right to select a movie and then press the joystick (OK).
◆ It begins playback.
◆ To pause playback, press the joystick (OK).
◆ To stop playback, hold down the joystick (OK).
[ Notes ]
✤ You can play back photo files as well as movie files.
✤ When connected to other devices with the Audio/Video cable, no screen is displayed on the LCD monitor.
✤ AV equipments other than TV may not properly receive AV signal.
✤ When you connect your Miniket Photo with a TV, icons may appear cut out on the TV screen.
Miscellaneous Information : Connecting To Other Devices
Line Input
VIDEO AUDIO
(L) (R)
00934J VP-MS10 UK~155 6/17/06 7:14 PM Page 140