Samsung VP-MS11 - Manual (Page 65)

ENGLISH
65 65
Photo Mode : Setting the Capturing Options
4
5
6
MENU
ISO
Photo Photo
Multi Shot Multi Shot
Off
Normal
AEB
Move Move Select Select Exit Exit
Photo
Multi Shot
Move Select Exit
OK
23
23
Photo
Multi Shot
Move Select Exit
MENU
ISO
Photo Photo
Multi Shot Multi Shot
Off
Normal
AEB
Move Move Select Select Exit Exit OK
23
23
2592
Photo
Multi Shot
Move Select Exit
Photo
Multi Shot
Move Select Exit
IN 23 23
23
Setting the Multi Shot
You can take a series of pictures continuously with just one press of the shutter.
1. Turn the Mode Dial to Photo mode.
2. Press the [POWER] button to turn on the Miniket Photo.
3. Press the [MENU] button.
◆ Menu screen appears.
4. Move the joystick left / right to select <Multi Shot>.
5. Select an option by moving the joystick up / down, and then press the joystick
(OK).
6. Press the [MENU] button to exit the menu.
◆ An icon indicating the selected Multi Shot mode appears on the screen.
◆ If <Off> is selected, no icon will be displayed.
[ Notes ]
✤ When you set the Multi Shot enabled, you cannot use the flash.
✤ < Anti-Shake> is not available when you set the Multi Shot enabled.
✤ Restarting the Miniket Photo will cancel the Multi Shot setting.
✤ Regarding Multi Shot with Scene modes, refer to page 72.
✤ While the menu screen is displayed, pressing the [Record / Stop] button will exit the menu.
3
IN
2592
Photo
Multi Shot
Move Select Exit
Photo
Multi Shot
Move Select Exit
23
23 23
Off
Normal
AEB
Disables Multi Shot and takes one photo at a time.
Enables Multi Shot and takes 3 photos in a row.
Enables Multi Shot and takes 3 photos in a row with exposure bracketing
of -0.3 EV / 0 EV / +0.3 EV
00934J VP-MS10 UK~089 6/17/06 6:26 PM Page 65