Samsung VP-MS11 - Manual (Page 69)

ENGLISH
69 69
Photo Mode : Setting the Capturing Options
4
5
6
MENU
ISO
A
Photo Photo
White Balance White Balance
Auto
Daylight
Cloudy
Fluorescent H
Move Move Select Select Exit Exit
Photo
White Balance
Move Select Exit
OK
23
23
Photo
White Balance
Move Select Exit
MENU
ISO
A
Photo Photo
White Balance White Balance
Auto
Daylight
Cloudy
Fluorescent H
Move Move Select Select Exit Exit OK
23
23
2592
Photo
White Balance
Move Select Exit
Photo
White Balance
Move Select Exit
IN 23 23
23
Setting the White Balance
The White Balance allows calibration of the picture for accurate colour display in different lighting
conditions. It is recommended to set the white balance prior to any recording.
1. Turn the Mode Dial to Photo mode.
2. Press the [POWER] button to turn on the Miniket Photo.
3. Press the [MENU] button.
◆ Menu screen appears.
4. Move the joystick left / right to select <White Balance>.
5. Select an option by moving the joystick up / down, and then press the joystick
(OK).
◆ To set the Custom WB, frame the white subject on the center. Press the joystick (OK) to
set, or press the [MENU] button to cancel and exit to Menu screen. Photos captured after
the Custom WB set will be affected by the setting.
6. Press the [MENU] button to exit the menu.
◆ An icon indicating the selected white balance appears on the screen.
◆ If <Auto> is selected, no icon will be displayed.
[ Notes ]
✤ In general outdoors picture taking, <Auto> setting will allow users to have best results.
✤ As the lighting condition changes, set the appropriate white balance before taking a picture.
✤ The subject used for <Custom WB> should be white. If not, the colour balance will not be natural.
✤ Regarding White Balance setting in Scene modes, refer to page 72.
✤ While the menu screen is displayed, pressing the [Record / Stop] button will exit the menu.
3
IN
2592
Photo
White Balance
Move Select Exit
Photo
White Balance
Move Select Exit
23
23 23
AUTO
Daylight
Cloudy
Fluorescent H
Fluorescent L
Tungsten
Custom WB
Automatically sets according to the shooting environment.
Adjusts the colour according to daylight/indoor, outdoor light
You can select this when you cannot have daylight as a direct light, such as when it is
partly-cloudy or cloudy.
Suitable in a halogen or 3-wavelength light environment.
Suitable for a fluorescent light environment.
Suitable for an incandescent light environment.
You can adjust the white balance as you wish based on the shooting environment.
00934J VP-MS10 UK~089 6/17/06 6:26 PM Page 69