Samsung VP-MS11 - Manual (Page 32)

ENGLISH
32 32
✤ Only mini SD cards are supported.
✤ Samsung is not responsible for data loss due to misuse.
✤ Turning the power off / ejecting the mini SD card during the memory operation such as formatting, deleting, recording, and
playback may damage the data.
✤ You may modify the name of a file / folder stored in the mini SD card using a PC. Miniket Photo may not recognise modified
files.
✤ It is recommended that you power off before inserting or ejecting the mini SD card to avoid losing data.
✤ It is not guaranteed that you may use a memory card formatted on other devices. Be sure to format your mini SD card using
the Miniket Photo.
✤ Save important files separately on other media, such as floppy disk, hard disk, or CD.
✤ You have to format newly-purchased mini SD cards, mini SD cards with data on it that Miniket Photo cannot recognize or the
cards that have data saved by other devices.
✤ A mini SD card has a certain life span. If you use it for a long time, you cannot record new data. In this case, you have to
purchase a new mini SD card.
✤ A mini SD card is a precision electronic equipment. Do not bend it, drop it, or cause it to suffer a strong impact.
✤ Do not use or store in a place that has high temperature and humidity or dusty environment.
✤ Do not allow foreign substances on the mini SD card terminals. Use a soft dry cloth to clean the terminals if required.
✤ It is recommended to use a mini SD card case to avoid losing data from moving and static electricity.
✤ After a period of use, the mini SD card may get warm. This is normal, not a malfunction.
✤ Damaged data may not be recovered, and SAMSUNG is not responsible for the lost data. Make sure to back up important
files separately on a PC.
Getting Started
Using a mini SD card (Optional Accessory)
✤ This Miniket Photo only supports the mini SD card.
✤ A mini SD card adapter is not supported by this Miniket Photo. The mini SD
card adapter is used for other devices that supports only SD Card.
✤ A mini SD card adapter supports a mechanical write protection switch. Setting
the switch prevents accidental erasure of files recorded on the mini SD card.
To enable writing, move the switch up to the direction of terminals. To set write
protection, move the switch down.
[ Note ]
✤ A mini SD card is an optional accessory.
Name of Each Part: mini SD card
Terminals
Write
protection
switch
mini SD card mini SD card adapter