Samsung VP-MS11 - Manual (Page 75)

ENGLISH
75 75
Photo Mode : Setting the Capturing Options
4
5
6
MENU
TYPE
Anti Shake Anti Shake
Off
On
Move Move Select Select Exit Exit OK
Move Select Exit
23
23
Anti Shake
Anti Shake
Move Select Exit
MENU
TYPE
Off
On
Move Move Select Select Exit Exit OK
23
23
Anti Shake Anti Shake
2592
IN
Anti Shake
Move Select Exit
Move Select Exit
23 23
23
Anti Shake
Setting the Anti-Shake Function (Image Stabilisation)
With the Miniket Photo, you can reduce unstable images by minimizing the effects of natural shaking
movements when taking pictures of still objects in dark places.
Anti-Shake provides a more stable picture when:
◆ Recording with zoom
◆ Recording with a slower shutter speed
1. Turn the Mode Dial to Photo mode.
2. Press the [POWER] button to turn on the Miniket Photo.
3. Press the [MENU] button.
◆ Menu screen appears.
4. Move the joystick left / right to select <Anti-Shake>.
5. Select an option by moving the joystick up / down, and then press the joystick (OK).
◆ <Off>: Disables Anti-Shake function.
◆ <On>: Enables Anti-Shake function.
6. Press the [MENU] button to exit the menu.
◆ If <On> is selected, < > icon appears on the screen.
Anti-Shake
When it is activated, one shutter release will take 3 contiguous pictures to produce one stabilised picture.
The stabilisation range is up to 2% in all 4 directions (up / down / left / right). For example, a rectangle
subject of 100mm width and height can be stabilised up to 2mm movement in vertical / horizontal
direction.
The Method
When the Miniket Photo has shaking movement, specific subject’s outlines from 3 contiguous captured
images will be recognised and processed to concur and produces stabilised picture.
[ Warning ]
✤ Anti-Shake has no effect on a moving subject.
✤ Purposely moving the Miniket Photo or taking pictures in a moving vehicle will reduce the Anti-Shake’s effect.
✤ It is recommended to use separate lighting and tripod (optional accessory) when the <Anti-Shake> is not enough to have
clear result.
[ Notes ]
✤ Anti-Shake does not work for movie recording.
✤ You can reduce unstable images by minimizing the effects of natural shaking movements when taking pictures of still
objects in dark places.
✤ <Multi Shot> mode will cancel the <Anti-Shake> setting.
✤ <Anti-Shake> setting is available when you set the Flash to off.
✤ When <Anti-Shake> is enabled, it takes about 5 seconds to process and save the image.
✤ Regarding <Anti-Shake> use with Scene modes, refer to page 72.
✤ While the menu screen is displayed, pressing the [Record / Stop] button will exit the menu.
3
2592
IN
Anti Shake
Move Select Exit
Move Select Exit
23
23 23
Anti Shake
00934J VP-MS10 UK~089 6/17/06 6:26 PM Page 75