Silicon Image SiliconDrive SSD-DXXX(I)-4210 - Manual (Page 12)

P RODUCT S PECIFICATIONS SSD-D XXX (I)-4210 D ATA S HEET
S ILICON S YSTEMS P ROPRIETARY
This document and the information contained within it is confidential and proprietary to SiliconSystems, Inc.
All unauthorized use and/or reproduction is prohibited.
4210D-03DSR P AGE 3 F EBRUARY 2, 2009
P
RODUCT
S
PECIFICATIONS
Note: All SiliconDrive EP 2.5" PATA Drive values quoted are typical at
25°C and nominal supply voltage.
S YSTEM P ERFORMANCE
S YSTEM P OWER R EQUIREMENTS
Table 1: System Performance
Reset to Ready Startup Time (Typical/Maximum) 200ms/400ms
Read Transfer Rate (Typical) 50MBps
Write Transfer Rate (Typical) 50MBps
Burst Transfer Rate 66MBps
Controller Overhead (Command to DRQ) 2ms (maximum)
Table 2: System Power Requirements
DC Input Voltage 5.0 ± 10%
Sleep (Standby Current) 100mA
Read (/Peak) 200mA
Write (/Peak) 300mA