Silicon Image SiliconDrive SSD-DXXX(I)-4210 - Manual (Page 70)

ATA C OMMAND B LOCK AND S ET D ESCRIPTION SSD-D XXX (I)-4210 D ATA S HEET
S ILICON S YSTEMS P ROPRIETARY
This document and the information contained within it is confidential and proprietary to SiliconSystems, Inc.
All unauthorized use and/or reproduction is prohibited.
4210D-03DSR P AGE 61 F EBRUARY 2, 2009
Set Multiple Mode — C6h
The Set Multiple Mode command allows the host to access the drive via Read
Multiple and Write Multiple ATA commands. Additionally, the command sets
the block count (i.e., the number of sectors within the block) for the Read/Write
Multiple command. The sector count per block is set in the Sector Count
register.
Table 47: Set Multiple Mode — C6h
Register D
7
D
6
D
5
D
4
D
3
D
2
D
1
D
0
Feature X
Sector Count Sector Count
Sector Number X
Cylinder Low X
Cylinder High X
Drive Head X X X Drive X
Command C6h