Samsung DIRECTV SIR-TS160 - Manual (Page 22)

COMPONENT OUT (Y Pb Pr video)
Using standard A/V cables, these jacks connect your DIRECTV
® High-Definition
Receiver to a TV or VCR that accepts high-definition component video input.
RGB OUT
Using an RGB monitor cable, this jack connects your DIRECTV HD Receiver to a TV
that accepts high-definition RGB video input.
DVI / HDCP OUT
Using a digital DVI cable, this jack connects your DIRECTV HD Receiver to a TV that
accepts the unconverted DVI signal from a high-definition digital broadcast (from
satellite, or antenna). Supports HDCP content protection. (For the best access to
high-definition programming, connect this output to the corresponding DVI/HDCP
input that supports HDCP technology on your HDTV or HDTV Monitor.)
DOLBY DIGITAL OUT (OPTICAL)
Using an optical digital audio cable, this jack allows you to connect your DIRECTV
HD Receiver to an A/V receiver that accepts optical digital audio input.
DOLBY DIGITAL (COAXIAL)
Using a coaxial digital audio cable, this jack allows you to connect your DIRECTV HD
Receiver to an A/V receiver that accepts coaxial digital audio input.
TV OUT
Using an RF coaxial cable, this jack provides a basic connection between your
DIRECTV HD Receiver and your TV or VCR.
CH 3/4 switch
This switch sets the channel for viewing the TV Out signal on your TV.
DVI, RGB / Y Pb Pr switch
This switch determines the signal type output by either DVI/HDCP OUT and RGB
OUT, or COMPONENT OUT jacks.
RESOLUTION SELECT switch
This switch allows you to set the video resolution output by the DIRECTV HD
Receiver to match the resolution of your TV or monitor (1080i, 720p, 480p/i).
Affects the signal output from the COMPONENT OUT, RGB OUT, and DVI/HDCP
OUT jacks.
TEL LINE
A telephone line connected to this jack allows you to order pay per view
programming.
VCR CONTROL
The VCR control cable connects to this jack.
Chapter 2: Getting started
15