Chapter 3: setting up and connecting, High-definition receiver, you can use, A/v jacks for both audio and video, or – Samsung DIRECTV SIR-TS160 User Manual
Page 32
Chapter 3: Setting up and connecting
8
(Optional) connect your VCR.
To connect your VCR to your DIRECTV
®
High-Definition Receiver, you can use
•
S-Video jack for video with the A/V audio jack for audio, or
•
A/V jacks for both audio and video, or
•
TV OUT RF jack
Choose the best quality connection that is supported by your VCR (and that you did
not already use to connect your TV). The S-Video jack provides the highest quality
video for your VCR connection. The A/V jacks provide the next best video quality
and high quality audio for your VCR. The TV OUT RF jack provides a basic
connection that carries both audio and video signals to your VCR.
Whichever connection you choose, connect one end of the audio and video cables
to the appropriate OUT jack(s) on your DIRECTV HD Receiver. Connect the other
end of the audio and video cable(s) to the audio and video inputs on your VCR.
Finally, connect your VCR to your TV by connecting audio and video output jacks on
your VCR to available audio and video input jacks on your TV.
VIDEO OUT
1
TV OUT
ANTENNA IN
OR
VCR
AUDIO
VIDEO
IN
S-VIDEO
S-VIDEO
DVI/ HDCP OUT
25