Sony TC-TX313 - Manual (Page 4)

4
Hooking up the system
Firmly connect the AU BUS
connecting cord to the AU BUS jack
on the DHC-MD313.
1
Complete steps 1 through 4 to hook up your system using the supplied cords.
Note
The AU BUS connecting cord is used for exchanging
signals between the tape deck and the DHC-MD313.
If you do not connect the cord firmly, the tape deck
and DHC-MD313 may not operate correctly.
TC-TX313 rear panel
DHC-MD313 rear panel
Mains lead
AU BUS
connecting
cord
Audio connecting
cords (supplied)
DHC-MD313
rear panel
B
A
B
A