Recording a cd – Sony TC-TX313 User Manual

Page 8

Advertising
background image

8

Recording a CD

— CD Synchro Recording

The CD SYNC button lets you record from a
CD to a tape easily. You can use TYPE I
(normal) or TYPE II (CrO

2

) tape, since the

tape deck automatically detects the tape type.

3

Place a CD on the disc tray of the
DHC-MD313.

4

Set DIRECTION to

A to record on

one side. Set it to

a to record on

both sides.

5

Press CD SYNC on the tape deck.

The tape deck stands by for recording
and the CD player stands by for
playback. The indicators on the CD
SYNC,

®REC, · (for the top side) and

∏ buttons light up.
If you want to record starting from the
bottom side, press

ª (for the bottom

side) so the indicator on the

ª button

lights up.

6

Press

∏ on the tape deck.

Recording starts.

To stop recording

Press

π on the tape deck or TAPEp on the

remote.

Tips

• When you press POWER on the tape deck, only

the tape deck turns on. Press POWER on the
DHC-MD313 to turn on the DHC-MD313
component system.

• Inserting the tape when the power is off

automatically turns on the tape deck only. Press
POWER on the DHC-MD313 to turn on the DHC-
MD313 component system before recording.

• The cassette indicator lights up in red when a

cassette is inserted and goes off when no cassette
is inserted.

• When you want to reduce the hiss noise in low-

level high-frequency signals, set DOLBY NR to
ON before step 5.

• If the tape reaches the end of the top side during

both sides recording, the fadeout feature prevents
the track from ending abruptly at the end of the
tape (Fade Synchro). The track is recorded again
from the beginning of the bottom side.

• The fadeout feature also works when you record

on one side only.

Notes

• You cannot listen to other sources while recording.
• When you record on both sides, be sure to start

from the top side. If you start from the bottom
side, recording stops at the end of the bottom side.

* This tape deck is equipped with the Dolby B-type

noise reduction system.

1

Press POWER on the DHC-MD313
to turn on the DHC-MD313
component system.

The tape deck turns on automatically.

2

Insert a blank tape.

4

5

Cassette
indicator

1

TAPE

p

The remote
supplied with
the DHC-MD313

With the side you want to
record on facing up

2

DOLBY NR*

π

ª

6

Tape deck
TC-TX313

·

Advertising