Sharp PG-MB60X - Manual (Page 21)

-17
Quic
k Star
t
Page 30
4.
Adjust the angle
5.
Adjust the focus and the zoom
Page 32
7.
Turn the Power off
Page 29
6.
Select the INPUT mode
Page 33
HEIGHT ADJUST button
••••• This projector is equipped with an “Auto Keystone
Correction” function that automatically corrects
any trapezoidal distortion within the projected
image. The correction is made automatically
provided the vertical incline or decline is within 12
degrees.
2 2 2 2 2 Adjust the projected image size
••••• Adjust the projected image size by adjusting
zoom.
On the remote control
Adjust by pressing the
ZOOM buttons.
On the projector
1 1 1 1 1 Bring the projected image into focus
••••• Bring the projected image into focus by
adjusting the focus.
On the remote control
Adjust by pressing the
FOCUS buttons.
On the projector
Select the “INPUT 1” using the INPUT buttons on the projector or the INPUT1 button on the remote control.
••••• When pressing ' ' ' ' '/" " " " " on the projector, input mode switches in order of :
INPUT 1 INPUT 2 INPUT 3 INPUT 4
••••• When using the remote control, press / / / to switch the INPUT mode.
On the remote
control
On the
projector
" " " " " On-screen Display (RGB)
Press the STANDBY button, then press that button again while the confirmation message is displayed, to put
the projector into standby mode.
••••• Unplug the power cord from the AC outlet after the cooling fan stops.
On the remote control On the projector " " " " " On-screen Display
1 Press .
2 Adjust by pressing \ or |.
1 Press .
2 Adjust by pressing ' or ".
Adjust the projector angle
••••• Adjust the projector angle using the HEIGHT
ADJUST button.